Nano Coat V.2

Fireball ceramic coatings, now accessible to amateurs and DIYers

Nano Coat V2 is the DIY ceramic coating par excellence! The new Fireball Nano Coat V2 brings a new advanced silica formula with extreme hydrophobic properties. Manufactured using the latest technological advances, its high SiO2 concentration and its simple installation makes it an even easier choice for your next ceramic coating.


It can be applied alone or as a maintenance coating. Nano Coat V2 provides excellent protection, long life and strong resistance to harmful contaminants. It works on a variety of exterior and interior surfaces to protect from contaminants and improve the appearance of surfaces.

It leaves a superhydrophobic top layer on the paint, wheels and plastic parts of your vehicle, as well as on hard plastic interior surfaces and even leather surfaces.

This superhydrophobic layer gives a deep shine and a darkening effect of colors, giving a very wet effect on pale colored vehicles and an intense depth on dark vehicles. Nano Coat v2 restores even discolored plastics.

Nano Coat V2 is a professional ceramic protection, suitable for the general public and lovers of automotive aesthetics. It offers the simplest and most effective solution for your automotive aesthetic projects with its actual duration ranging from 12 to 24 months, or more, depending on the maintenance.

FEATURES:

• Uses the highest quality ingredients.
• Safe on all exterior surfaces.
• Innovative design.
• Excellent hydrophobicity.
• Real life durability of 24-36 months.

WHAT’S IN THE BOX:

• (1) Fireball Nano Coat V2 35mL
• (1) Applicator Block
• (4) Suede cloths for ceramic installation.

Can be installed on many indoor and outdoor surfaces:

• Paint
• Exterior Trims
• Glass
• Interior hard plastics
• Leathers

Tips:

Before application, the surface should be completely clean and free of oil, solvents or wax. In case of irregularities (due to improper application or applied too thick), wipe immediately with Fireball Reborn and reapply on the entire section.

Preparation:

Like any ceramic, preparation plays an essential role in the final result. Be sure to thoroughly wash all surfaces before starting your Fireball ceramic project.

• If the surfaces has or show signs of wax, sealants or older ceramic, use Fireball Wax Off to reset your protection. Wax Off safely removes old waxes, sealants and even many ceramic coatings from surfaces in one easy step without the use of abrasives.
• Perform chemical decontamination using Fireball Iron Burn to remove iron deposits and industrial fallout from painted surfaces.
• Proceed to physical decontamination using a traditional or synthetic clay. We suggest the use of a synthetic clay glove with Fireball Iron Burn, thanks to its sufficiently lubricated formulation, will allow a quick and effective decontamination of all painted and glass surfaces. *Fireball Glass also works great for clay lubrication.
• Dry surfaces.
• We recommend performing a paint enhancement / correction. It should be noted that a ceramic coating does not require a correction to obtain good adhesion, however it must be completely free of oils and surface contaminants. *The use of abrasives HELPS clean/prepare the surface for proper adhesion. If the paint shows signs of damage, you will want to correct them before laying the ceramic.
  Once the surfaces are properly decontaminated and inspected, use the Fireball Reborn to remove remaining oils, finger prints and polishing residues from the surfaces. Reborn contains a mixture of several types of alcohols to remove oils that may still be present on surfaces and blocks the adhesion of the ceramic. We suggest using two soft microfiber cloths during this crucial step. One to apply the Reborn, the other to wipe leftover residue.

Installation:

• Use one of the suede cloth from the box and put it on the applicator block provided. Use the slots on the sides of the block to secure the suede cloth in place.
• Invert the bottle several times before opening.
• Open the bottle and pour a dozen drops on the suede cloth to cover most of the suede. Each new suede should be "primed" with a dozen drops.
• Move up and down and left to right over sections of about 2 feet by 2 feet. You will want to level the product application as much as possible during this step, this step is crucial in order to respect the suggested wipe off times and cover the surfaces.
• Nano Coat flash quickly. This is a "wipe on, wipe off". It is important to go one section at a time to respect the evaporation times of the product. ** Wiping the ceramic too early will remove too many ceramic particles and greatly reduce the smooth effect on the paint. You will want to feel a SLIGHT resistance under the microfiber when wiping, without having difficulty leveling the ceramic during the first pass of the microfiber.
• Repeat the steps for the following sections. A second layer is not necessary, but can be applied inside a 4 to 12 hours following the installation of the first layer.
• Once finished, thoroughly clean the inside of the cap and the top of the lid. Close the bottle and put it back in the box (away from sun) for future use. Once opened, it is best to use the ceramic within 6 months.

35mL size, good for 2 to 3 vehicles.