Matched Combo - Heavy Cut Compound and Heavy Cut Pad
Match Combination for Heavy Cut. (z.b. 1st step in a 1 or 2 step polish process.)
1x Autostolz Heavy Compound 500ml
High Cut Compound Polish. Engineered to maximise efficiency for professional detailers. Superior high gloss shine. Quickly and easily removes defects up to 1,200 grit. Can be used with rotary, dual action random orbital or forced rotation polisher Machines, or by hand.
Low dusting. Long work time. Easy to clean. High removal rate. VOC free. No fillers, no silicones, no waxes, non toxic solvents, body shop safe. Made in Germany to the highest possible standards
DIRECTIONS:
1. The first step in a multi-step polish. For deeper scratches sand to 1,200-1,500 grit first.
2. Start with 5-6 large pea sized dots, work it into the pad gently by hand or spreader. You want to work some polish into the cuts in the pad and cover all of the pad surface evenly and thinly (not thick) It is important no not miss a section as this could lead to micro abrasions. Recommended speeds: DA /Random Orbital: 1,500-10,000rpm. Rotary: 1,500 – 2,000 rpm
3. Reapply more polish as necessary, typically 1/5 of a bottle per car depending on condition and use. When finished Remove any polish residue with a soft and clean microfibre cloth.
4. Follow with Autostolz™ Final Finish Polish.
With all chemicals always do a small, subtle test spot first. Do not let freeze.
Cut: High
Combined with Recommended Combination:
1x Autostolz High Cut Polishing Pad 145/30mm
A complex dual layer pad design, rethinks the foam pad to improve cutting ability and work times.
The white open celled cutting layer has fine crosshatched cuts that serve multiple purposes. More compound is retained on the pad, and as the pad is used these open up and expand to increase the surface area and abrasion, similar to the fibers of a wool pad, but with the cooling and longer work time advantages of an open cell foam pad. These cuts also increase work time as the pad cools better, and the cuts allow removed clearcoat to go away from the surface, for a better finish, and the pad can be used longer.
This is complemented with the red closed cell thermal layer, which endures pad strength and stability under heat and isolates the cutting surface from the backing plate and machine. This further improves work times and a more consistent pad structure for better and more even finish.
All these combine to allow a more efficient high cut polish, and better finish results.
The Pad tapers out to allow easier polishing into tight areas without the backing plate coming into contact with the paint surface.
Size: Medium Fits 5”/125mm Backing plates Pad Size: 145mmx25mm
Cut: High
Made in Germany