{"product_id":"rockcar-clay-mitt","title":"Rockcar Clay Mitt — Microfiber Decontamination Glove","description":"\u003ch2\u003eWhy decontamination matters\u003c\/h2\u003e\n\u003cp\u003eWashing removes loose dirt, but bonded contamination — iron particles from brake dust and rail fallout, tar, oxidation, and industrial deposits — embeds into your clear coat and cannot be removed by soap and water alone. Left in place, this contamination causes dull paint, prevents wax and sealant from bonding correctly, and accelerates paint deterioration. Claying removes this layer and restores a smooth, clean surface before you polish, seal, or apply a ceramic coat.\u003c\/p\u003e\n\u003ch2\u003eWhat the Rockcar Clay Mitt does\u003c\/h2\u003e\n\u003cp\u003eThe mitt uses a dual-layer construction: a light grey microfiber mesh backing for comfort and grip, and a dark grey polymer synthetic clay working surface that contacts the paint. The mesh pattern on the working surface is designed to channel contaminants away from the paint and draw them into the material rather than dragging them across the surface. This significantly reduces the risk of marring compared with traditional flat clay products.\u003c\/p\u003e\n\u003cp\u003eBecause the mitt covers a larger surface area per pass than a clay bar, a full vehicle decontamination takes just 5–15 minutes. It is reusable for 100–120 vehicles — rinse thoroughly under running water between sections and between vehicles to clear trapped contaminants before continuing.\u003c\/p\u003e\n\u003cp\u003eA recessed internal hook allows you to hang the mitt for storage. The hook sits inside the mitt and does not contact the working surface, so there is no scratch risk during use.\u003c\/p\u003e\n\u003ch2\u003e⚠️ Always use lubricant — this is essential, not optional\u003c\/h2\u003e\n\u003cp\u003eNever use this mitt on a dry surface. Always apply a generous amount of clay lubricant, detail spray, or waterless wash to the panel before and during use. Because the mitt works quickly, it is easy to keep moving after the lubricant has thinned out without noticing — this is when marring occurs. If you feel any resistance or drag at any point, stop immediately, reapply lubricant, and rinse the mitt under running water before continuing. The faster you work, the more attentive you need to be about lubricant coverage.\u003c\/p\u003e\n\u003ch2\u003e⚠️ Do not use on hot surfaces\u003c\/h2\u003e\n\u003cp\u003eAlways work in shade or wait for panels to cool before claying. Using the mitt on a surface that is warm or hot to the touch risks damage to both the paint and the mitt.\u003c\/p\u003e\n\u003ch2\u003eClay mitt or clay bar — which is right for you?\u003c\/h2\u003e\n\u003ch3\u003eRockcar Clay Mitt — choose this if:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYou want a fast full-vehicle decontamination (5–15 minutes)\u003c\/li\u003e\n\u003cli\u003eYour vehicle is regularly maintained and contamination is not severe\u003c\/li\u003e\n\u003cli\u003eYou are claying multiple vehicles and speed matters\u003c\/li\u003e\n\u003cli\u003eYou want a reusable tool that lasts 100–120 vehicles\u003c\/li\u003e\n\u003cli\u003eYou are preparing for a polish, sealant, or ceramic coat application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRockcar Medium or Heavy Clay Bar — choose this if:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYour vehicle has heavy or long-standing contamination\u003c\/li\u003e\n\u003cli\u003eYou are dealing with severe industrial fallout or paint overspray\u003c\/li\u003e\n\u003cli\u003eThoroughness is more important to you than speed\u003c\/li\u003e\n\u003cli\u003eYou want the most complete decontamination result possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure?\u003c\/strong\u003e If your vehicle is regularly maintained and you want a fast, effective clean before polishing or sealing, the Clay Mitt is ideal. If your vehicle has heavy contamination, has not been clayed in a long time, or you want the most thorough result possible, choose the Rockcar Medium or Heavy Clay Bar instead.\u003c\/p\u003e\n\u003ch2\u003eSurfaces\u003c\/h2\u003e\n\u003cp\u003eSafe to use on paint, glass, and wheels. Do not use on matte or satin finishes.\u003c\/p\u003e\n\u003ch2\u003eHow to use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWash the vehicle thoroughly first to remove all loose dirt, sand, and dust.\u003c\/li\u003e\n\u003cli\u003eSoak the mitt in water and keep it wet throughout.\u003c\/li\u003e\n\u003cli\u003eSpray clay lubricant generously onto a small section of the panel.\u003c\/li\u003e\n\u003cli\u003eWork the polymer clay side of the mitt across the surface using light, overlapping passes. Apply no downward pressure — the weight of your hand is enough.\u003c\/li\u003e\n\u003cli\u003eKeep lubricant applied at all times. If you feel any drag or resistance, stop and reapply immediately.\u003c\/li\u003e\n\u003cli\u003eRinse the mitt under running water regularly to clear trapped contaminants from the surface.\u003c\/li\u003e\n\u003cli\u003eWash the vehicle again after claying to remove any residue.\u003c\/li\u003e\n\u003cli\u003eFollow with a machine polish, paint sealant, or ceramic coat for best results.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eProduct specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Rockcar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Microfiber + Polymer Synthetic Clay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 22 × 14.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking surface:\u003c\/strong\u003e Dark grey polymer synthetic clay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking:\u003c\/strong\u003e Light grey microfiber mesh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable:\u003c\/strong\u003e 100–120 vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime per vehicle:\u003c\/strong\u003e 5–15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricant required:\u003c\/strong\u003e Yes — always\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe on:\u003c\/strong\u003e Paint, glass, wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Matte finishes, satin finishes, hot surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKey Points:\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast full-vehicle decontamination in 5–15 minutes\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— larger surface area covers more paint per pass than a traditional clay bar, making it ideal for regular maintenance claying or high-volume detailing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContaminant-trapping mesh surface\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— high-density polymer synthetic clay channels iron fallout, tar, oxidation, and rail dust into the material rather than across the paint, significantly reducing scratch and marring risk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable — 100 to 120 vehicles\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— rinse under running water between uses to clear trapped contaminants. Internal recessed hook for storage; hook does not contact the working surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe on paint, glass, and wheels\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— dual-layer construction: light grey microfiber mesh backing, dark grey polymer synthetic clay working surface. Size: 22 × 14.5 cm. Not for matte or satin finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricant is essential — never use dry\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— always apply clay lubricant, detail spray, or waterless wash generously and reapply often. Speed means staying attentive; stop immediately if you feel any drag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor maximum decontamination, choose a clay bar instead\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— the Clay Mitt is built for speed and regular maintenance. For heavily contaminated vehicles or the most thorough result, use the Rockcar Medium or Heavy Clay Bar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RockCar","offers":[{"title":"Default Title","offer_id":48365185138936,"sku":"RC3222MT","price":49.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0666\/2946\/8408\/files\/rockcar-clay-mitt-microfiber-decontamination-glove-rockcar-clay-bar-rc3222mt-00810096301703-lovecars-2237313.png?v=1778590157","url":"https:\/\/lovecars.co.nz\/products\/rockcar-clay-mitt","provider":"Lovecars","version":"1.0","type":"link"}